Knowing Your Rev rate.

If you have a low rev rate you will have less power but your ball will read the lane better. When the lanes become dry low rev rate makes it easy to bowl because your ball wont read the front part of the lane as early. A lower rev rate also will help you bowl more games.

If you have a high rev rate you will have a power full strike ball. With a high rev rate your ball will read the lane faster, but when the lanes are oily the ball will still read the lanes early but the result will be a strong back end reaction. When the lanes become dry you better hope you got a less aggressive bowling ball with you, if you don’t your going to have to start throwing the ball harder.

Here are some techniques for high and low rev rates.

IF you have a lower rev rate go out and get a high reactive bowling ball and drill the ball then go long with a strong back end. That means if you throw your ball straight you will love the pin carry you will have, but if you have a low rev rate and you like to hook it then it will have a stronger back end. When the lanes become dry just keep moving left if your a righty.

IF you have a high rev rate go out a get a heavy rolling ball, what a heavy rolling ball if a lower reactive ball the will drive through the pins. When the lanes are oily go straighter, but when the lanes get really dry then you might have some problem. When the lanes are dry and your standing as far as you can to the left, you should put LOFT on your ball. Loft is where you throw the ball farther down the lane, what loft does to your ball is it makes it go longer. When the ball is in the air it can’t hook and it can’t read the lane too early. If you still get too much hook and you can’t throw your ball any harder you have to go to the last thing to do. What you have to do is stand on negative 5 board or so in that area. Then when your standing in that area your foot should be almost sliding into the lane dividers. Then you will have to loft your ball over the gutter.

Write a comment

You need tologin.